Overbed Rail Chart Holders - A4 size, made from white polycarbonate (3mm thick) with either 2 Rings or Bulldog Clip

Nylon Coated Wire Chart Holder (if hooks are required please advise width needed):
Small size (317 x 228 x 80mm) available with hooks to hang overbed rails or wall mounted
Large size (505 x 322 x 86mm) available with hooks to hang overbed rails or wall mounted

Chart Trolley are designed to easily move a large number of charts as required. These trolleys when ordered come with the requisite number of chart holders. There are 3 models of Chart Trolleys which are 12, 24 and 36.
The features of the Chart Trolleys are:
» Shelves: 1 x 25cm clearance from bottom shelf to bottom of chart holders.
» Wheels: 12.5cm standard
» Wall bumpers: 4 x 10cm
» Optional locking lid
» Available in Stainless Steel or Powder Coated

The Flow Chart Tables are available in Large size only.
The features of the Flow Chart Tables are:
» Wheels: 5cm standard
» Tilting table top for flexibility when writing or when not in use.
» Gas spring height adjustment with range of 84 - 114cm.
» Positive tilt mechanism with safety lock for horizontal position.
» Three bulldog clips positioned at the top of the table top.
» Pen Holder at bottom of table top.
» Available in Stainless Steel or Powder Coated

These Oxford IV Mobile Stands are available with 5 different styles of IV heads which are:
2 and 4 Prong Ramshead, Inside Hook, Outside Hook and 4-Prong Carol Pole
The features of the IV Mobile Stand are:
» Nylon Base with 5 wheels (65cm diameter)
» 5cm standard wheels
» Adjustable height IV Pole from 133 to 243cm.

The Multipurpose Trolley can be used in a number of different areas such as clearing or stock trolley.
The features of these trolley's are:
» Push handles on either end with handles angled outwards
» Shelves: clearance between top and bottom shelf is 42cm (2 shelves) and 31cm (3 shelves)
» Wheels: 12.5cm standard
» 10mm deep Recessed shelves
» Multipurpose Trolley Available in Stainless Steel Only.
» Heavy Duty Multipurpose Trolley Available in Stainless Steel or Powder Coated

Oxygen Cylinder Holder Stationary and Mobile is designed to hold either 6 or 12 C-size Oxygen Cylinders. This trolley features:
» Handle at either end,
» 12.5cm standard wheels (mobile model) and
» Only available in Stainless Steel.

Oxygen Bottle Trolleys are available to move a single Oxygen Cylinder they are available in models to move Size C, D and G.
Available with 15cm Heavy Duty Wheels in either Stainless Steel or Powdercoated.

Oxygen Bottle Holder Detachable for Size C Bottle - Available in Stainless Steel only.