The Oxford Emergency Crash Cart is a durable and fully featured Emergency Cart ready for a range of possibilities. This cart has the following features:
» Rails: 3 sides standard
» Drawer: 3 x 10cm, 1 x 15cm and 1 x 25cm deep that use full extension roller bearing runners that gives access to entire drawer. Top 3 drawers have removeable draw dividers.
» Lift-Up Side Shelf: 30 (L) x 50cm (W).
» Wheels: 12.5cm standard single with 2 locking.
» Central Locking - available with key lock or key lock and tamper seal.
» Adjustable IV Pole.
» Oxygen Cylinder Holder for C-size.
» Backboard.
» Powder Coated with Red Body and White Drawers.

The Oxford range of Endoscopy Carts is designed to provide safe storage of your valuable endoscopy equipment.
This cart has the following features:
» Rails: 3 sides standard.
» Drawer: Heavy duty that use full extension roller bearing runners that gives access to entire drawer with 40kg capacity.
» Wheels: 12.5cm standard single with 2 locking.
» Available in Stainless Steel only

The Oxford ICU Recovery Cart is designed for use in ICU to be used as a mobile table especially when required at night. This cart has the following  features:
» Drawers: 5 x 10cm and 1 x 25cm deep.
» Tilt adjusted writing platform.
» Wheels: 12.5cm standard single with 2 locking.
» Available in Stainless Steel or Powder Coated

The Oxford ICU Workstation is designed for use in ICU specifically to hold essential supplies. This workstation cart has the following  features:
» Drawers Left: 2 x 12.5cm, 1 x 16.5cm and 1 x 25cm deep.
» Drawers Right: 2 x 12.5cm
» Shelves Right: 1 x 15cm and 1 x 24cm clearance
» Double Maxi Bin Rail (Bins not included)
» Push Handle and Sharp container bracket. Sharps container sold seperately
» Wheels: 12.5cm standard single with 2 locking.
» Available in Powder Coat Only from range of colours.

The Oxford Plaster Cart is designed for use in busy orthopaedic area and with some unique features can provide significant benefits to staff working in this area. This cart has the following features:
» Drawers: 5 x 15cm and 1 x 30cm deep with the drawers configured to make best use of the space available.
» Lift up side shelf.
» Recessed top to easily contain the mess.
» Large bowl attached to one side of the trolley for easy hydration of the plaster rolls.
» Waste Bin.
» Wheels: 12.5cm standard single with 2 locking
» Available in Stainless Steel and Powder Coat from range of colours.

The Oxford Range of Resuscitation Carts are designed for use in storage of critical supplies for resuscitation as well as equipment. This cart has the following  features:
» Rails: 3 sides standard.
» Bottom shelf, Recessed with retaining rails
» Pullup side shelf
» Wheels: 12.5cm standard with 2 locking
» Available in Stainless Steel only

The Oxford Resuscitation Cart is designed for use in storage of critical supplies for resuscitation as well as equipment. This cart has the following  features:
» Rails: 3 sides standard.
» Drawers: 4 x 12.5cm (half-width) and 1 x 7.5cm deep.
» Shelf Clearance: 29cm from bottom shelf to bottom of drawers.
» Lift up side shelf - 34 (L) x 45cm (W).
» Wheels: 12.5cm standard single.
» Available in Stainless Steel and Powder Coat from range of colours.